Samyung Navis 3800, User Manual

Page: 29 / 101

30
After selecting file name, Press ( ).
Once you load the saved TRACK file, any previous TRACK drawn on the screen will be erased.
1.1.6 Track Erase
It is a function to erase TRACK file saved device at '1.1.4 TRACK Save'.
Be pay attention to use this menu, You never recover once you complete this menu.
Insert the device that has files to be erased. ( Possible to omit when using
☞
Internal ROM)
Select the device, which has files to be erased at [Storage Select].
After select a file name and then press ( ) button in order to show [Do you want to
erase ?] and select
『
[YES] / [NO].
If select [Internal ROM], following two menus are displayed.
Memory Clear :.Erase TRACK on the screen
File Name : Erase a saved TRACK into a file of ROM.
( The file name is marked in sa
☞
ving a file only)
( )
[1.DATA]
( )
[1.TRACK DATA]
( )
[6.ERASE]
( )
How to save/call Track by transmitting data
The function that is saved into other equipment by using external input/ouput terminal
How to set up from Data TX unit
[
1.DATA
] [
1.TRACK DATA
] [
4.SAVE
]
After input file
name(0001~9999),
[
COM PORT
]
How to set up from Data RX unit
[
1.DATA
] [
1.TRACK DATA
] [
5.LOAD
] [
COM PORT
]
After selecting the file that should be called ,