Samwon Tech TEMI1000 Series, Operation Manual

Page: 28 / 80

26
(6) Termination screen for operation of program
● The program operation is terminated while it shows the message, “The program operation is terminated.”
when the operation for segment setting range saved into the pattern is terminated.
● The message is not appeared on the screen when it is forcibly terminated by pressing “Stop” button during operation.
● The message is disappeared by touching the corresponding part when the operation termination message is display in case of operation termination.
(It is same with the stationary operation termination.)
[Fig. 3-23] Termination screen for operation of program