Samwon Tech TEMI1000 Series, Operation Manual

Page: 21 / 80

19
03. Operation state screen setting
(6) Termination screen for operation of stationary time setting
● The stationary operation is terminated while it shows the message, “The time setting operation is terminated.”
when the operation is terminated by the elapse of setting time in [4. Operation motion setting]
● The message is not appeared on the screen when it is forcibly terminated by pressing “Stop” button during operation.
● The message is disappeared by touching the corresponding part when the operation termination message is display in case of operation termination.
(It is same with the program operation termination.)
[Fig. 3-12] Termination screen for operation of stationary time setting