Samwon Tech SDR100E Series, Instruction Manual

Page: 107 / 110

105
18. System initial setting
Instruction Description
Setting the language for use
Setting the display in initial screen
The information set in the initial screen information is displayed in electricity is ON. Refer to [Fig. 18-2]
The screen in the internal memory is displayed in electricity is ON. Refer to [Fig. 18-4]
The sentence displayed in the initial screen is displayed in power ON.
●
The information display 1,2,3 sentence can be set and maximum 24 characters input is available.
●
The setting is available when the display method is set in letter.
Setting the password used in entering to the system screen
●
The password was set in ‘0’ in delivery from factory
Setting the data sending direction between SDR100E and SD card
Sending the SDR100E parameter to SD card. Refer to [Fig. 18-5]
Sending the parameter saved in SD card to SDR. Refer to [Fig. 18-6]
Selection of the photo displayed in the initial screen in power ON
Display the Y/N of the INIT(JPG/BMP/PNG) file saved in SD card.
TEXT
PICTURE
DOWNLOAD
UPLOAD
Parameter Initial value
LANGUAGE SET
DISPLAY METHOD
SYSTEM PASSWORD
PARAMETER BACKUP
INTERNAL MEMORY Entire capacity 4GB (About 11 years saving is available for 1 sec of saving period)
INFORMATION1
INFORMATION2
INFORMATION3
INIT
INFOR
MATION
Setting range Unit
ENG, KOR, CHT, CHS, JPN, POL
TEXT, PICTURE
0 ~ 9999
DOWNLOAD, UPLOAD
0~9, A~Z, Special character (Maximum 24 characters)
0~9 A~Z, Special character (Maximum 24 characters)
0~9 A~Z, Special character (Maximum 24 characters)
ABS
ABS
ABS
ABS
ABS
ABS
ABS ENG
TEXT
0
DOWNLOAD
SAMWONTECH CO.,LTD.
TEL : 82-32-326-9120
HTTP://WWW.SAMWONTECH.COM.
LANGUAGE SET
DISPLAY METHOD
PARAMETER BACKUP
INTERNAL MEMORY
SD CARD MEMORY
INIT INFORMATION
SYSTEM PASSWORD