Samsung VP-D6550 Owner'S Instruction Book Download

Page: 72 / 160

ENGLISH

Slow Playback (Forward/Reverse)

Picture Search (Forward/Reverse)

Playback Pause

The Camcorder : Playback

✤

This function works only in PLAY mode.

✤

The PLAY, STILL, STOP, FF, REW buttons are located on the Camcorder and the remote control.

✤

The F.ADV (Frame advance), X2, SLOW buttons are located on the remote control only.

✤

To prevent tape and head-drum wear, your Camcorder will automatically stop if it is left in still or slow
modes for more than 3 minutes.

■

Press the

√

(PLAY/STILL) button during playback.

■

To resume playback, press the

√

(PLAY/STILL) button.

■

Press the

œœ

√√

(REW/FF) buttons during playback or still mode.

To resume normal playback, press the

√

(PLAY/STILL) button.

■

Keep pressing

œœ

√√

(REW/FF) buttons during playback or still mode.

To resume normal playback, release the button.

■

Forward Slow playback
- Press the

SLOW

button on the remote control during playback.

- To resume normal playback, press the

√

(PLAY/STILL) button.

■

Reverse Slow Playback
- Press the

œ»

(-) button during forward slow play back.

- To resume forward slow playback, press the

»√

(+) button.

- To resume normal playback, press the

√

(PLAY/STILL) button.

Various Functions in PLAY Mode

Summary of Contents for VP-D6550

































































































































































Search results

Summary of Contents for VP-D6550

Reviews:

Related manuals for VP-D6550

Brands by name

Popular brands

Samsung VP-D6550, Owner'S Instruction Book

Search results

Summary of Contents for VP-D6550

Reviews:

Related manuals for VP-D6550

Brands by name

Popular brands