Samsung VP-D6550 Owner'S Instruction Book Download

Page: 42 / 160

ENGLISH

The Camcorder : Basic Recording

✤

The EASY.Q mode works only in REC mode.

✤

The EASY.Q mode allows a beginner to easily make good recordings.

1. Set the

Power

switch to

REC

2. By pressing the

EASY.Q

button, all functions on the Camcorder will be set to off and the

recording settings will be set to the following basic modes:

■

Battery level, recording mode, counter, date/time, and DIS (

) will be displayed.

■

The word

EASY.Q

will appear on the LCD screen at the same time.

However, the Date/Time will only be seen if it has been previously set. (see page 35)

3. Press the

Start/Stop

button to start recording.

Recording will begin using the basic automatic settings.

4. Press the

EASY.Q

button again in the

STBY

mode and then turn the EASY.Q mode off.

■

The EASY.Q function will not turn off while you are recording.

■

The camcorder will return to the settings that were set prior to activating EASY.Q mode.

[ Notes ]

■

In EASY.Q mode, certain functions are not available, such as Menu, BLC, Manual focus.
If you want to use these functions, you must first turn the EASY.Q mode off.

■

The EASY.Q mode settings are

released

when the Battery pack is removed from the Camcorder

and must be reset when the Battery pack is replaced.

■

EASY.Q mode will not turn off during a recording.

■

Photo image recording using the PHOTO button while EASY.Q is set releases DIS function.

■

Digital Zoom, Color Nite or Digital Effect is not available in the EASY.Q mode.

Using EASY.Q Mode (for Beginners)

60min

0:00:10

STBY

Summary of Contents for VP-D6550

































































































































































Search results

Summary of Contents for VP-D6550

Reviews:

Related manuals for VP-D6550

Brands by name

Popular brands

Samsung VP-D6550, Owner'S Instruction Book

Search results

Summary of Contents for VP-D6550

Reviews:

Related manuals for VP-D6550

Brands by name

Popular brands