ENGLISH
20
20
✤
It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording.
The Hand strap enables you to:
-
Hold the Camcorder in a stable, comfortable position.
-
Press the
ZOOM
and
Start/Stop
button without having to change the position of your hand.
1. Pull and open the Hand Strap
Cover and release the Hand
Strap. Insert the Hand Strap into
the Hand Strap hook.
2. Insert your hand into the Hand
Strap and adjust its length.
3. Stick it back onto the Hand Strap
Cover.
The Shoulder Strap enables you to carry your camcorder
around in complete safety.
1. Insert the end of Shoulder Strap into the Shoulder Strap
Hook on the Camcorder.
2. Insert the other end of the strap into the ring attached to
the Hand Strap.
3. Thread each end into the buckle, adjust the length of the
strap and then pull it tight in the buckle.
1. Hook up the Lens Cover with Lens
Cover Strap as illustrated.
2. Pull and open the Hand Strap Cover
and release the Hand Strap.
3. Hook up the Lens Cover Strap to
the Hand Strap and adjust it
following the steps as described for
the Hand Strap.
4. Close the Hand Strap Cover.
1
2
3
1
2
3
4
1
2
3
Preparation
Adjusting the Hand Strap
Hand Strap
Attaching the Lens Cover
Shoulder Strap
Summary of Contents for VP-D6550
Page 156: ...ENGLISH Memo 156 156 ...