76
77
When Aerial Source is set to Terrestrial or Cable
●
Digital Channel Tuning
Scans for a digital channel.
1.
Select the
New
.
"
When selecting
Aerial
→
Terrestrial
:
Channel
,
Frequency
,
Bandwidth
"
When selecting
Aerial
→
Cable
:
Frequency
,
Modulation
,
Symbol Rate
2.
Select the
Search
. When scanning has finished, a channel is updated in the channel list.
●
Analogue Channel Tuning
Scans for an analogue channel.
1.
Select the
New
.
2.
Set the
Programme
,
Colour System
,
Sound System
,
Channel
and
Search
.
3.
Select the
Store
. When scanning has finished, a channel is updated in the channel list.
Channel mode
●
P
(programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
●
C
(aerial channel mode) /
S
(cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
Fine-Tuning the Screen
Broadcasting
>
Channel Settings
>
Fine Tune
Try Now
"
Available for analogue broadcasts only.
Analogue pictures can become shaky and full of noise. If this happens, you can fine-tune the signal
and/or reduce noise to clear up the picture.
1.
Select
Channel Settings
>
Fine Tune
. An adjustment bar appears on the screen.
2.
Press the
l
or
r
button to make adjustments. Select
Save
or
Close
to apply the new setting.
Select
Reset
to reset the Fine-Tune operation.
