25
English
04
Settings
|NOTE |
\
To view the password as you enter it, use the
arrow buttons to select
Show Password
on
the right side, and then press
OK
button.
7.
When finished, select
Done
and then press
the
OK
button. The product verifies the
network connection and then connects to the
network.
8.
When verification is complete, select
OK
, and
then press the
OK
button.
|NOTE |
\
You should be able to find the Security Code or
Pass Phrase on one of the set up screens you
used to set up your router or modem.
Ğ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings
values manually.
1.
Follow the directions in Wireless - Automatic
through Step 5.
2.
The product searches for a network, and then
displays the connection failed message.
3.
On the bottom of the screen, select
IP
Settings
, and then press the
OK
button.
The
IP Settings
screen appears.
4.
Select the
IP Settings
field, and then press
the
OK
button.
5.
Select
Enter manually
in the
IP Settings
field, and then press the
OK
button.
6.
Select a parameter to enter (
IP Address
, for
example), and then press the
OK
button.
Use the
buttons on the remote control
to enter the numbers for the parameter.
Use the
buttons on the remote control
to move from entry field to entry field within a
parameter. When done with one parameter,
press the
OK
button.
7.
Press the or button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 6.
8.
Repeat Steps 6 and 7 until you have filled in
all parameters.
|NOTE |
\
You can get the Network parameters from your
Internet provider.
9.
When finished, select
OK
, and then press the
OK
button. The Security Screen appears.
10.
On the Security screen, enter your network's
Security Code or Pass Phrase. Enter letters by
selecting a letter with the
buttons,
and then pressing the
OK
button.
11.
When finished, select
Done
at the right of the
screen, and then press the
OK
button.
The product verifies the network connection
and then connects to the network.
12.
After the product verifies the network, select
OK
, and then press the
OK
button.
Ğ
WPS(PBC)
1.
In the Home screen, select
Settings
, and
then press the
OK
button.
2.
Select
Network
, and then press the
OK
button.
3.
Select
Network Settings
, and then press the
OK
button.
4.
Select
Wireless
in the
Network Settings
screen, and then press the
OK
button.
5.
Press the button on your remote, and then
press the button to select
WPS(PBC)
.
6.
Press the
OK
button on your remote. The
"Press the PBC button on your wireless
router within the next two minutes." message
appears.
