Samsung SVR-3200 User Manual Download

Page: 96 / 104

User Manual

Check the remote’s ID

Check the remote’s specification

8. The buttons aren’t working

Check the DVR’s power supply

Check the Screen Lock setting

9. The DVR won’t connect to the network

Check whether the network cable is connected properly

Check the DVR’s IP

Check the PC’s IP

Ping

Test

Check the PC’s specification if Web Viewer will not run properly

10. Cases to contact purchasing agency

If the following cases occur, immediately cease the product operation, shut off the power

supply and take the console to the purchasing agency for repair.

The product malfunctions during operation (Ex.: Strange noise, smell, smoke, etc.)

The power cable or the connector has been damaged.

The product has been flooded.

The product has been spilled on.

The product will not function as stated in this document.

The product was severely damaged due to physical shock.

A stark change in performances has been noticed.

Summary of Contents for SVR-3200









































































































Search results

Summary of Contents for SVR-3200

Reviews:

Related manuals for SVR-3200

Brands by name

Popular brands

Samsung SVR-3200, User Manual

Search results

Summary of Contents for SVR-3200

Reviews:

Related manuals for SVR-3200

Brands by name

Popular brands