Samsung SVR-3200 User Manual Download Page 57

Page: 57 / 104

User Manual

6.6 Audio

Setup

This menu is used to set audio recording, sync or mixing.

6.6.1 Audio

This menu is used to set the audio channel, audio recording, audio gain and sync.

Audio Channel

Select a channel for audio.

Audio Recording

Decide whether to record audio. If No is selected, audio is outputted only for live video feeds. If

Yes is selected, audio is outputted even for playback.

Audio Gain

This menu is used to adjust audio volume up or down.

Sync Video Channel

This menu is used to determine which channel the input audio is linked to for output. This is

available only for recording. Audio output for live video feeds is described in Audio Mixing. If

Sync Video Channel is set to 5 for Channel 1 audio, the audio inputted into Channel 1 is

outputted when Channel 5 is selected. By default, Channel 1 audio is outputted to Channel 1

video.

Summary of Contents for SVR-3200









































































































Search results

Summary of Contents for SVR-3200

Reviews:

Brands by name

Popular brands

Samsung SVR-3200, User Manual

Search results

Summary of Contents for SVR-3200

Reviews:

Brands by name

Popular brands