manualshive.com logo in svg

Samsung SVR-3200, User Manual

Share
Download
Samsung SVR-3200 User Manual Download Page 91

 

User Manual

 

 

                90 

 

 

 

7.5.10 Audio Use 

 

 

If a channel is paired with an audio channel, right-clicking the visual and selecting "Listen" from 

the pop-up menu will activate audio input. Also, to listen to the audio signal, Mute also needs to 

be unchecked. 

 

7.5.11 Image Channel Close 

 

Clicking the channel buttons to the left of the screen will disconnect the visual connection and 

fade to black. To reconnect the channel, click the off channel button again. 

 

7.6 Playback 

 

Recorded data can be reviewed in the playback mode. Only users with HDD access may use 

this mode. The playback mode uses 16 Partition screens and supports searches by time, 

calendar and cycle. Also, paused streams may be printed or saved as .bmp image files. 

Detailed explanation and description of the features of the playback page is as follow. 

 

 

Summary of Contents for SVR-3200









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands