Samsung SVR-3200, User Manual

Page: 74 / 104

User Manual
73
How to register the remote controller is as shown below.
-
Direct the remote controller to the DVR.
-
Press the [ID] button based on the specified remote controller ID.
-
If the remote controller ID and the DVR ID are the same, the DVR buzzer beeps.
-
The remote controller is now configured and available for use.
Remote Configuration Setup
This determines whether to use the SNM Configuration program for setup.
If "Enable" is set, SNM Configuration is available for setup. If "Disable" is set, SNM
Configuration is unavailable for setup.
Remote Relay
Remote Relay is used to determine whether to use the Relay On/Off function on the SNM
monitor.
If "Enable" is set, all four relays can be controlled remotely. If "Disable" is set, remote control is
unavailable with the SNM Configuration.
Serial Port
A total of four serial ports are available for the DVR. Two are RS-232C and the other two are
RS-485.
Device
This selects a connected device.
Interface
This sets an interface to use.
COM1 and COM3 are fixed to RS-232C, COM2 uses RS-422/485 and COM4 uses
RS-485.
Baud rate/Parity/Stop Bit/Data Bit
Set this in the same way as the settings for an external device.
PTZ
PTZ Return
This determines whether to return to Home when not controlling PTZ for a certain
period of time. When this is set to Off, PTZ does not return to Home even though PTZ