Samsung SVR-3200, User Manual

Page: 44 / 104

User Manual
43
Apply
You must press the [Apply] button to save the Date/Time values. Then, the dialog box below
appears.
Setups other than "Date/Time" setup are automatically recorded if the menus are
completely closed, but "Date/Time" setup is not automatically recorded because
it may damage the HDD recording file system. Be sure to press the [Apply]
button to apply changes.
6.3 Camera Setup
This menu is used to set the conditions of each camera connected to the unit.
You can use the camera setup menu to adjust [Title], [Status], [Color], [AGC], [Brightness],
[Contrast] or [PTZ setting] for each of the connected cameras. For more information on each
menu item, refer to the following sections.
NTSC and PAL cameras cannot be used for the unit at the same time. For
example, you cannot connect NTSC cameras to 1CH to 5CH while connecting
PAL cameras to 6CH to 16CH. Also, when replacing NTSC cameras with PAL
cameras, you must reboot (power on/off) the unit after connecting the PAL
cameras for proper recognition.
The set values apply to monitoring and search in the same way.