manualshive.com logo in svg

Samsung SVR-3200, User Manual

Share
Download
Samsung SVR-3200 User Manual Download Page 75

 

User Manual

 

 

                74 

 

 

 

is not controlled for a long time. When this is set to On, PTZ returns to Home if PTZ is   

not controlled for a specified period of time. 

 

 

PTZ Idle Time 

 

This is used to set when PTZ returns to Home if PTZ is not controlled. 

 

If this is set to 5 seconds, PTZ returns to Home when PTZ is not controlled for more   

than 5 seconds. 

 

PTZ Port 

This is set if a connected camera supports PTZ (Pan/Tilt/Zoom).

 

Press the [Enter] button and use the left or right arrow key or the mouse wheel to set 

the PTZ port connected to the channel.

 

 

Camera ID 

This is set if a connected camera supports PTZ (Pan/Tilt/Zoom).

 

Press the [Enter] button and use the up or down arrow key or the mouse wheel to set 

the base address of the PTZ device. 

 

For more information on cameras supporting PTZ and how to set them up, refer 

to "7.4.9 PTZ Use".

 

 

 

6.9 System Setup

 

 

6.9.1 System Setup 

 

Summary of Contents for SVR-3200









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands