Samsung SVR-1620 Page 54 User Manual Download

Page: 54 / 68

SET-UP MENU

USER’S MANUAL

4-3. NETWORK SETUP

At the SYSTEM SETUP menu,

①

Turn the SHUTTLE ring to select the NETWORK SETUP >.

②

When the NETWORK SETUP screen is selected, turn the SHUTTLE and JOG dial to set IP

ADDRESS, NETMASK and GATEWAY to matches with your network environment.

③

Press the ESC button to exit this menu.

4-4. COM PORT SETUP

At the SYSTEM SETUP menu,

①

Turn the SHUTTLE ring to select the COM PORT SETUP >.

②

Press the ENTER button. The COM PORT SETUP menu screen appears.

4-4-1. SYSTEM ID SETUP

At the COM PORT SETUP> menu,

①

When the SYSTEM ID is selected, turn the JOG dial to set the SYSTEM ID number.

( The system ID can be set from 0 to 127)

②

Turn the SHUTTLE ring to go to another menu in the COM PORT SETUP> or press the

ESC button to escape from the COM PORT SETUP>.

NETWORK SETUP>

IP ADDRESS    - 000.000.000.000
GATEWAY    - 000.000.000.000
SUBNET MASK - 255.255.255.000
DHCP                    : OFF

[COM PORT SETUP]

1 SYSTEM ID: 0
2 RS-232C SETUP >
3 RS-422/485 SETUP >

Summary of Contents for SVR-1620





































































Search results

Summary of Contents for SVR-1620

Reviews:

Related manuals for SVR-1620

Brands by name

Popular brands

Samsung SVR-1620, User Manual

Search results

Summary of Contents for SVR-1620

Reviews:

Related manuals for SVR-1620

Brands by name

Popular brands