OPERATION
26
USER’S MANUAL
2-9-2. REMOVAL OF R-HDD
①
Before removing the R-HDD from the DVR HDD rack, turn the SHUTTLE ring on the JOG /
SHUTTLE dial to select REMOVE R-HDD FROM RACK.
②
Press the ENTER button and “OK” message will be appeared on the screen.
③
Insert the R-HDD rack key, and then turn it to the left to turn off the power of R-HDD rack.
2-9-3. RELOAD OF R-HDD
①
After the replacement of the R-HDD into the R-HDD rack, and then insert the key and turn it
to the right to turn on the power of R-HDD rack.
②
Turn the SHUTTLE ring to select the RELOAD R-HDD TO RACK.
③
Press the ENTER button and the green LED at the front panel of the rack will be turned on.
2-9-4. DISPLAY COPY STATUS
①
Turn the SHUTTLE ring to select the DISPLAY COPY STATUS.
②
Press the ENTER button. The COPY ENTER menu screen appears.
③
Press the ESC
button to escape from this menu.
[COPY TO R-HDD]
CHANNEL : ALL
S-REC TIME : YYYY/MM/DD HH:MM:SS
E-REC TIME : YYYY/MM/DD HH:MM:SS
START TIME : YYYY/MM/DD HH:MM:SS
END TIME : YYYY/MM/DD HH:MM:SS
START COPY TO R-HDD
RELOAD R-HDD TO RACK
REMOVE R-HDD FROM RACK
[DISPLAY COPY ENTER]
HDD COPY MODE : MANUAL
START TIME : YYYY/MM/DD HH:MM:SS
END TIME : YYYY/MM/DD HH:MM:SS
CUR TIME : YYYY/MM/DD HH:MM:SS
R-HDD TOTAL SPACE : 00000 (MB)
R-HDD FREE SPACE : 00000 (MB)
CUR TIME : Indicate current backup situation among the total backup data.
Note : Whenever you change the HDD, you should turn off the SVR-1620 power.
Any recorded data on the HDD from other system is not valid in this system.
The HDD must be initialized before using in this unit.
If the R-HDD Rack is not reloaded securely, HDD error message may be prompted. In this case,
lock the R-HDD key and turn the power off/on of DVR to reload R-HDD rack securely.
