SET-UP MENU
48
USER’S MANUAL
3-7. RELAY OUTPUT SETUP>
At the EVENT SETUP menu;
①
Turn the SHUTTLE ring to select the RELAY OUTPUT SETUP>.
②
Press the ENTER button. The RELAY OUTPUT SETUP menu screen appears.
③
Turn the SHUTTLE ring to select the desired section, and then choose ON or OFF by turning
the JOG dial. ( In the LOSS, MD and SENSOR section, “Number” : ON / “
-
” : OFF)
④
Press the ESC button to exit this menu.
3-8. SCREEN MODE
At the EVENT SETUP menu,
①
When the SCREEN MODE is selected, Turn the JOG dial to select the desired mode.
②
Turn the SHUTTLE ring to go to another menu in the EVENT SETUP> or press the ESC
button to exit the EVENT SETUP>.
3-9. EVENT RESET
At the EVENT SETUP menu,
①
When the EVENT MSG RESET is selected, Turn the JOG dial to select one of the interval of
event warning massage display.
②
Turn the SHUTTLE ring to go to another menu in the EVENT SETUP> or press the ESC
button to exit the EVENT SETUP>.
[RELAY OUTPUT SETUP]
1 LOSS - - - - - - - -
- - - - - - - -
LOSS OUTPUT: 1SEC
2 POWER: OFF
POWER OUTPUT:1SEC
3 MD - - - - - - - -
- - - - - - - -
MD OUTPUT: 1 SEC
4 SENSOR - - - - - - - -
- - - - - - - -
SENSOR OUTPUT: 1 SEC
LOSS : When the Video loss has occurred, the relay output will act.
POWER : When the Power of DVR is turned on or OFF, the relay output will act.
MD(Motion detection) : When the Motion has detected, the relay output will act.
SENSOR :When the DVR detect any sensor input signal, the relay output will act.
LOSS, POWER, MD and SENSOR OUTPUT : Each relay output will continuously act according to the set value.
SINGLE
: When the Event occurs, the event channel will be displayed in single channel screen mode.
MULTI : When the Event occurs, the event channel will be displayed in multi channel screen mode.
STAY : When the Event occurs, the event channel will be displayed in single channel screen mode but
won’t be converted in previous screen mode until user changes.
NORMAL : When the Event occurs, the Event message will be displayed without change of channel screen mode.
* If the events are occurred frequently, select the MULTI or NORMAL mode.
