Samsung SVR-1620 Page 17 User Manual Download

Page: 17 / 68

OPERATION

DIGITAL VIDEO RECORDER

2-2-2. Auto Sequence Display

(ADD AUTO SINGLE : ON)
- Press the AUTO button, each screen displaying will be automatically switching according to

the Auto Sequence Setup. (Please refer to the Auto sequence setup in the main menu, p32)

- “ADD AUTO SINGLE : OFF” in the Auto sequence setup menu, the single display wil be

skipped.)

- Press the AUTO button again to escape from the AUTO mode.
- To view the single display, select “ADD AUTO SINGLE : ON” in the Auto sequence setup

menu and the single display will be included in the Auto Sequence Display.

2-2-3. Freeze

MULTI SCREEN MODE

At the Multi display mode, Press the FREEZE button, and then select the desired camera
number.
Press the FREEZE button again to release the FREEZE mode.

SINGLE SCREEN MODE

Press the FREEZE button after the desired number of channel is selected..
Press the FREEZE button again to release the FREEZE mode.

Turn on the MULTI button after pressing the FREEZE button in the Multi SCREEN mode and all the channels will
display a freeze picture.

If an event takes place, the auto sequence mode will be cancelled.

Summary of Contents for SVR-1620





































































Search results

Summary of Contents for SVR-1620

Reviews:

Related manuals for SVR-1620

Brands by name

Popular brands

Samsung SVR-1620, User Manual

Search results

Summary of Contents for SVR-1620

Reviews:

Related manuals for SVR-1620

Brands by name

Popular brands