DTMF SYSTEM ADMINISTRATION
Some System Administration functions can be accessed by calling the SVM 400 from a touch tone phone.
These administrative functions allow the system administrator to:
1. Edit System Prompts.
2. Edit (add and remove) Subscribers.
3. Change the operating mode (Day, Night, etc.)
Accessing DTMF System Administration
To access the DTMF system administration mode:
●
Call the SVM 400 and from the Main Menu press the ‘#’ key followed by 3 zeros. If you are answered by a
prompt to enter your password you are in a mailbox and must first press “
✱
” to reach the Main Menu.
●
When prompted enter the administrator’s password specified in the System Wide Parameters. You will be
presented with the System Administration Menu.
Edit System Prompts
This allows you to create or edit system prompts.
●
Call the SVM 400, and access the System Administration Menu.
●
Press 1 to edit system prompts.
●
Follow the spoken instructions to edit system prompts.
At the very least you will probably need to create the following:
Day Greeting = Prompt 1001
Night Greeting = Prompt 1002
Holiday Greeting = Prompt 1003
Emergency (Bad Weather) Greeting = Prompt 1004
Subscriber Administration
This allows you to add and delete subscribers.
●
Call the SVM 400, and access the System Administration Menu.
●
Press 2 for subscriber information.
●
Follow the spoken instructions to create or delete subscribers.
Manually Changing the Operating Mode
This allows you to change the operating mode of the SVM 400. Changes will remain in effect until you manually
change it again.
●
Call the SVM 400, and access the System Administration Menu.
●
Press 3 for manually set the mode.
●
Follow the spoken instructions to change the operating mode. The following table details the options.
Day Mode = 1
Night Mode = 2
Holiday Mode = 3
Emergency (Bad Weather) Mode = 4
The mode to automatically follow the DCS Day/Night Mode = 0
SVM 400 Technical Manual Page 19
HOME
PAGE
Table of
Contents
