HARDWARE DESCRIPTION
SVM 400 System
The SVM 400 system is a compact self contained system that is designed exclusively for the DS 616. It can not
be used with any other SAMSUNG product. Do not use other voice mail system in combination with the SVM
400.
Serial Ports
The serial interfaces can be used to connect a modem or PC and provide local or remote PC
based administration, or output SMDR information.
Memory Connector
This is the connector to install the Compact Flash memory. The memory is used to store
all system programs and data.
Memory Access LED
The Memory access LED will flash green whenever the memory is being accessed. This
works in a similar way to the hard disk access LED on a PC.
Run Status LED
The Run Status LED shows the operating status of the card. Green indicates that the SVM
400 is running normally, any other condition indicates a fault.
Memory
This device is a Compact FLASH Media Card used for storing the main system program as well as
all messages and prompts. The amount of storage time on this module is determined by the size of the media
card measured in Mega Bytes (MB). To remove or insert a memory card, shut the power off to the SVM 400 and
then remove the Compact Flash from the SVM 400 by simply pulling it out.
RJ11 Connectors
These connectors are the interface for the DLI ports from the DS 616 system.
SVM 400 Technical Manual Page 13
HOME
PAGE
Table of
Contents
