Samsung SRD-830D User Manual Download

Page: 47 / 134

English

_47



USING THE DVR

•

Progressive : You can set the progressive camera to ON/OFF.



If you set it to <

> for the progressive camera, screen flickering will be reduced.

•

Screen Setup : The video appeared on the screen may vary
depending on the channel’s camera, configure the DVR
display to your preferences.
Select a channel and adjust the <

(Brightness)

(Contrast)

>, and <

(Color)

> of the selected channel.

•

Press the <

Init

> to initialize settings back to the default 50.

When the camera setup is done, press <

Setting the PTZ

To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched.
For other settings, refer to the “

Remote Devices

” settings. (Page 50)

Using the mouse may help make setup easier.

Use the up/down buttons (

) in <

Device

> window to

move to <

Camera

>, and press [

ENTER

] button.

Select <

PTZ

A window of PTZ settings appears.

Use direction buttons (

◄ ►

) to move to a desired

item, and select it.

•

Port : Select a port control method for the camera that is
connected to a channel.



You have two choices : <

RS-485

> and <

Coaxial



This is applicable only to SRD-830DC/850DC/870DC/1610DC/16
30DC/1650DC/1670DC.

•

ID : Set the ID of the connected camera of each channel.
You can easily setup by using the numeric buttons on the
remote control or front panel.

•

Protocol : Set the protocol of the connected camera of each
channel.



You can check the camera’s ID and protocol if you turn the
camera off and on after connecting it to the DVR.
(Page 69)



For the <

Coaxial

> type, CCVC and PELCO-C protocols are

supported.

When the PTZ setup is done, press <

Screen Setup

Init

Apply to All CH

CH1 50

Cancel

Protocol



None



None



None



None



None



None



None



None



Camera

PTZ

Camera

Previous/Next Page

Cancel

<SRD-830/830D/850/850D/870/870D/1610/

1610D/1630/1630D/1650/1650D/1670/1670D>

<SRD-830DC/850DC/870DC/

1610DC/1630DC/1650DC/1670DC>

SRD

DC/

Port



ID Protocol

RS-485



None



RS-485



None



RS-485



None



RS-485



None



RS-485



None



RS-485



None



RS-485



None



RS-485



None



Camera

PTZ

Camera

Previous/Next Page

Cancel

Summary of Contents for SRD-830D







































































































































Search results

Summary of Contents for SRD-830D

Reviews:

Related manuals for SRD-830D

Brands by name

Popular brands

Samsung SRD-830D, User Manual

Search results

Summary of Contents for SRD-830D

Reviews:

Related manuals for SRD-830D

Brands by name

Popular brands