Samsung SRD-830D User Manual Download Page 18

Page: 18 / 134

18_

installation

When the installation of additional HDDs is done,
connect the power cable and connect the HDD
signal cables (SATA Cable) to connectors





the main board.



You can check the HDD map directly on the DVR.
Refer to “

Storage Device

HDD Map

”. (Page 48)



Note that the order the HDD data cable is connected will
not affect the operation. The only consideration is the
length of each cable.

If adding HDDs to SRD-830D/830DC/850D/850DC/870D/870DC/1610D/
1610DC/1630D/1630DC/1650D/1650DC/1670D/1670DC



The following figures are based on Model SRD-1670D.

First, loosen the screws on both sides and remove
the cover.

Disconnect the power and HDD Signal cable from
the existing HDDs, then loosen the screws (x4) in
the left/right and upper sides and remove the upper
brackets.

Upper Bracket

Lower Bracket

ble.

Cover

Summary of Contents for SRD-830D







































































































































Search results

Summary of Contents for SRD-830D

Reviews:

Related manuals for SRD-830D

Brands by name

Popular brands

Samsung SRD-830D, User Manual

Search results

Summary of Contents for SRD-830D

Reviews:

Related manuals for SRD-830D

Brands by name

Popular brands