Samsung SNO-7084R, User Manual

Page: 99 / 180

Smart codec setup
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1. From the Setup menu, select the
< video & audio ( ) > tab.
2. Click < Smart codec setup >.
3. Select ROI Area.
• Face detection : Active if a face is
recognized on the monitoring screen.
J
` You can detect max 35 faces on the
screen at the same time.
`
The minimal face size detectable is 45x45
for 2mega mode with the max resolution
and 64x64 for 3 mega mode with the
max resolution. But there may be some
errors depending on the characteristics of
your face or lighting.
• Manual : Specify the ROI area to monitor manually.
4. Set the image quality.
The ROI area will be displayed in the specified quality.
5. If manually specifying the ROI area, select a desired area with the mouse pointer and
drag it as much as you want.
`
You can specify up to 5 distinct areas.
6. To cancel all the settings for the area, click the [ clear ( ) ] button.
7. When done, click [ apply ( ) ].
J
`
The Smart codec will not be active if it is set to < Off > in < Video profile >. (page 82)
`
Go to < Event >

< Event setup >

< Face detection > and change it to < Enable > to set the
desired area for facial detection.
English _99
●
Setup
Screen