Samsung SNO-7084R, User Manual

Page: 127 / 180

to use video analytics
It detects event that meets all conditions specified by sensitivity, size and area and the
event condition rules.
1. Select the video analysis mode.
2. Set < Sensitivity >, < Size > and < area >.
For further details on settings, refer
to “ to use motion detection ”. (Page
125~126)
3. Select < analytics > tab.
4. Select the video analysis type.
• Passing : Detects an object passing
by the line set by a user.
• Entering/Exiting : Detects an object
entering or exiting into/from the area
set by a user.
• Appearing (Disappearing) : Detects
motions of appearing on or
disappearing from the user-defined
area or the entire screen area.
5. Set the video analysis rules.
For further details on settings, refer to
“ to set the video analysis rules ”.
(page 128~129)
6. Set whether to use < Detection result
overlay >.
Specified rules of virtual lines and areas
are displayed on the monitoring page.
7. When done, click [ apply ( ) ].
English _127
●
Setup
Screen