Samsung SNO-7084R, User Manual

Page: 101 / 180

networK Setup
interface
1. From the Setup menu, select the
< network ( ) > tab.
2. Click < interface >.
3. Set the < interface > and < ipv6 setup >
as necessary.
• IP type : Select an IP connection type.
- Manual : Specify the IP address,
Subnet mask, Gateway, DNS1,
and DNS2.
- DHCP : IP address, gateway
and subnet mask will be set
automatically while DNS1 and DNS2 are both manually set.
- PPPoE : IP address, gateway and subnet mask will be set automatically while
DNS1, DNS2, ID and Password are set manually.
`
If you set it to < Manual >, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.
• MAC address : Shows the MAC address.
• IP address : Displays the current IP address.
• Subnet mask : Displays the < Subnet mask > for the set IP.
• Gateway : Displays the < Gateway > for the set IP.
• DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
4. Set the < ipv6 setup >.
`
Set to < Use > to use IPv6 address.
• Default : Use the default IPv6 address.
• DHCP : Display and use the IPv6 address obtained from the DHCP server.
• Manual : Enter IP address and gateway manually and use it.
5. When done, click [ apply ( ) ].
J
`
The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous
settings will be restored automatically.
`
Once completed with editing, click [ Apply ( ) ] to apply changes and the browser exits.
After a while, connect again with the changed IP.
English _101
●
Setup
Screen