Samsung SND-L5083R, User Manual

Page: 34 / 164

installation & connection
34_ installation & connection
installation
1. Drill a hole (3mm diameter and minimum
depth of 10 mm) for an installation screw
using the template provided.
2. Align the installation hole of the camera to
the previously drilled hole, and then insert a
screw and tighten.
3. Connect and arrange the necessary cables
lest that they should be damaged or twisted
while installing the camera.
4. Adjust the lens in a desired direction by
referring to the “ adjusting the monitoring direction for the camera ” section. (page
39)
5. Close the dome cover.
`
To ensure waterproofing, tight up the fixing bolts using the L-wrench.
connecting Lan cable
1. Remove the dome cover and the case.
2. Pull out the long projected part of the rubber plug on the
bottom and remove it as shown in the figure.
J
` Use an appropriate cable bush for the LAN cable to be
connected.
- Basic camera : Use the cable with a diameter of Ø5~6.5.
- Components provided : Use the cable with a diameter of
Ø7~8.5.
3. Insert the LAN cable into hole made by removing the
projected part of the rubber plug in step 2 above.
4. Remove the sheath with a cable cutter, and align the
cables.
5. Connect the LAN cable with a LAN connector, and insert
it into the LAN tool.
6. Connect the finished cable to the Ethernet port.
FRONT
ACT LINK
NETWORK
FRONT
ACT L
INK
NETW
ORK
FRONT
ACT L
INK
NETW
ORK
FRONT
ACT L
INK
NETW
ORK
N
F
W
ACT LINK
NETWORK
RESET