Samsung SHR-8080 User Manual Download

Page: 18 / 120

installation

Install a HDD (x1) on the lower bracket and fi x it with
screws.

Install HDDs (x3) on the upper bracket and fi x them
with screws.

When the installation of additional HDDs is done,
insert the lower and upper brackets into the DVR
and fi x them with the provided screws.

When the installation of additional HDDs is done,
connect the power cable and connect the HDD
data cables (SATA Cable) to connectors





the main board.

Note that the number of a HDD data calbe is nothing to do
with operation of the HDD. Just make arrangements of the
connectors considering the length of each connector.

Check if the connectors are properly connected and
there is no problem with wiring, and close the cover
and fi x it with screws.

Cover

Upper Bracket

Lower

Bracket

Lower Bracket

Upper Bracket

Add

Installed by default

Add

00769B_SHR-8162_ENG-NEW.indb 18

2008-12-04 오전 10:14:24

Summary of Contents for SHR-8080

























































































































Search results

Summary of Contents for SHR-8080

Reviews:

Related manuals for SHR-8080

Brands by name

Popular brands

Samsung SHR-8080, User Manual

Search results

Summary of Contents for SHR-8080

Reviews:

Related manuals for SHR-8080

Brands by name

Popular brands