background image

11_

 

appendix

openssL License

* Copyright (c) 1998-2006 The OpenSSL 

Project.  All rights reserved.

 * Redistribution and use in source and binary 

forms, with or without

 * modification, are permitted provided that the 

following conditions

 * are met:

 * 1. Redistributions of source code must retain 

the above copyright

 *    notice, this list of conditions and the 

following disclaimer.

 * 2. Redistributions in binary form must 

reproduce the above copyright

 *    notice, this list of conditions and the 

following disclaimer in

 *    the documentation and/or other materials 

provided with the

 *    distribution.

 * 3. All advertising materials mentioning features 

or use of this

 *    software must display the following 

acknowledgment:

 *    “This product includes software developed 

by the OpenSSL Project

 *    for use in the OpenSSL Toolkit. (http://www.

openssl.org/)”

 * 4. The names “OpenSSL Toolkit” and 

“OpenSSL Project” must not be used to

 *    endorse or promote products derived from 

this software without

 *    prior written permission. For written 

permission, please contact

 *    [email protected].

 * 5. Products derived from this software may 

not be called “OpenSSL”

 *    nor may “OpenSSL” appear in their names 

without prior written

 *    permission of the OpenSSL Project.

 * 6. Redistributions of any form whatsoever 

must retain the following

 *    acknowledgment:

 *    “This product includes software developed 

by the OpenSSL Project

 *    for use in the OpenSSL Toolkit (http://www.

openssl.org/)”

 * THIS SOFTWARE IS PROVIDED BY THE 

OpenSSL PROJECT ‘‘AS IS’’ AND ANY

 * EXPRESSED OR IMPLIED WARRANTIES, 

INCLUDING, BUT NOT LIMITED TO, THE

 * IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR

 * PURPOSE ARE DISCLAIMED.  IN NO EVENT 

SHALL THE OpenSSL PROJECT OR

 * ITS CONTRIBUTORS BE LIABLE FOR ANY 

DIRECT, INDIRECT, INCIDENTAL,

 * SPECIAL, EXEMPLARY, OR 

CONSEQUENTIAL DAMAGES (INCLUDING, 

BUT

 * NOT LIMITED TO, PROCUREMENT OF 

SUBSTITUTE GOODS OR SERVICES;

 * LOSS OF USE, DATA, OR PROFITS; OR 

BUSINESS INTERRUPTION)

 * HOWEVER CAUSED AND ON ANY THEORY 

OF LIABILITY, WHETHER IN CONTRACT,

 * STRICT LIABILITY, OR TORT (INCLUDING 

NEGLIGENCE OR OTHERWISE)

 * ARISING IN ANY WAY OUT OF THE USE OF 

THIS SOFTWARE, EVEN IF ADVISED

 * OF THE POSSIBILITY OF SUCH DAMAGE.

 * =============================

 * This product includes cryptographic software 

written by Eric Young

 * ([email protected]).  This product includes 

software written by Tim

 * Hudson ([email protected]).

 */

 Original SSLeay License

 -----------------------

/* Copyright (C) 1995-1998 Eric Young (eay@

cryptsoft.com)

 * All rights reserved.

 * This package is an SSL implementation 

written

 * by Eric Young ([email protected]).

 * The implementation was written so as to 

conform with Netscapes SSL.

 * This library is free for commercial and non-

commercial use as long as

 * the following conditions are aheared to.  The 

following conditions

 * apply to all code found in this distribution, be 

it the RC4, RSA,

 * lhash, DES, etc., code; not just the SSL code.  

The SSL documentation

 * included with this distribution is covered by 

the same copyright terms

 * except that the holder is Tim Hudson (tjh@

cryptsoft.com).

 * Copyright remains Eric Young’s, and as such 

any Copyright notices in

 * the code are not to be removed.

 * If this package is used in a product, Eric 

Young should be given attribution

 * as the author of the parts of the library used.

 * This can be in the form of a textual message 

at program startup or

 * in documentation (online or textual) provided 

with the package.

 * Redistribution and use in source and binary 

forms, with or without

 * modification, are permitted provided that the 

following conditions

 * are met:

 * 1. Redistributions of source code must retain 

the copyright

 *    notice, this list of conditions and the 

following disclaimer.

 * 2. Redistributions in binary form must 

reproduce the above copyright

 *    notice, this list of conditions and the 

following disclaimer in the

 *    documentation and/or other materials 

provided with the distribution.

00769B_SHR-8162_ENG-NEW.indb   118

2008-12-04   오전 10:17:49

Summary of Contents for SHR-8080

























































































































Reviews: