background image

English

 

_

!

 over

view

important saFety instructions

Read these operating instructions carefully before using the unit.  

Follow all the safety instructions listed below.  

Keep these operating instructions handy for future reference.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has 
two blades with one wider than the other. A grounding type plug has two blades and a third 
grounding prong. The wide blade or the third prong are provided for your safety. if the provided 
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus combination to avoid injury from 
tip-over.
Unplug this apparatus during lightning storms or when unused for long 
periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been 
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or 
moisture, does not operate normally, or has been dropped.

1)
2)
3)
4)
5)
6)
7)
8)

9)

10)

11)
12)

13)

14)

00769B_SHR-8162_ENG-NEW.indb   3

2008-12-04   오전 10:13:18

Summary of Contents for SHR-8080

























































































































Reviews: