Samsung SHR-8080 User Manual Download

Page: 25 / 120

English

ive

Live screen conFiguration

icons on the Live screen

You can check the status or operation of the DVR with the icons on the live screen.

Name

Description

Current Date, Time

Displays the current time and date.

When you are logged in, the “

LOG ON

” icon will be displayed.

Screen Mode

Displayed if the zoom function is activated.

Displayed if you press the Pause button.
Displayed in Auto Sequence mode where all channels are switched at the

specific time interval.
Displayed if the recording is in process.

To cancel the recording, enter the password.

System Operation

Displayed if there is a problem with the cooling fan.

Displayed if the HDD is full and the DVR has an insufficient space to record.

Displayed if no HDD is installed or the existing HDD should be replaced.

Displayed if the HDD needs a technical examination.

Displayed if a new firmware is found from the network.

Video Input Status

Displayed if no input is entered in the condition that the camera is set to <

Nothing will be displayed on the screen if the camera is set to <

OFF

Camera Name/ Channel

Displays the camera name and the changed channel, if any.

Camera Operation

Displays the resolution of the recording screen. (Page 50)

Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.
Displays AUDIO ON/MUTE.

Not displayed in video mode if deactivated.
If the sensor is set to <

>, the input signal will be displayed on the screen of

the connected channel.
Displayed if a motion detected in the condition that the motion detection is set to

Displays the current record mode from Record/Event/Schedule.

2009-01-01 00:00:01

CAM 01

00769B_SHR-8162_ENG-NEW.indb 25

2008-12-04 오전 10:14:39

Summary of Contents for SHR-8080

























































































































Search results

Summary of Contents for SHR-8080

Reviews:

Related manuals for SHR-8080

Brands by name

Popular brands

Samsung SHR-8080, User Manual

Search results

Summary of Contents for SHR-8080

Reviews:

Related manuals for SHR-8080

Brands by name

Popular brands