Camera 1
harness
Alarm switch
Fuse holder
Connectors
DVR
(rear view)
Speed harness
Signal harness
Optional external
audio input for camera 1
Power and ignition harness
Alarm harness
Cable retainers
To camera 1
B (red)
Battery (black)
–
Ignition switch (yellow)
Left turn signal, indicator 1 (black)
Stop arm, indicator 2 (green)
Brakes, indicator 3 (red)
Warning lights, indicator 4 (brown)
Right turn signal, indicator 5 (white)
Speed sensor ground (black)
Speed pulse signal (green)
Speed sensor power 7.5
(red)
VDC
Wiring and Testing
1
Feed all of the
through the cable grommet and connect them to
the DVR as shown below.
harnesses
2
Make sure all cables are held inside the cable retainers at the back of the
DVR, as shown below. Carefully slide the DVR into the enclosure, taking care
not to pinch or bind any cables. Slide the lid onto the enclosure and secure it
with two #8×¼" retaining screws.
3
Connect all of the harnesses as shown above. Turn on the ignition switch. If
the
light on the front of the DVR does not turn green within
POWER
30 seconds,
read the troubleshooting instructions in the
.
Installation and User's Guide
4
Follow the DVR setup instructions in the
or
the
Quick Reference Guide
Installation and User's Guide
.
IMPORTANT:
The DVR must be connected as close to the battery
(or master battery switch) as possible to avoid a low-voltage DVR
shutdown when the battery is heavily loaded.
Information in this guide is subject to change without prior notice.
© 2004 Seon Design Inc.
www.seon.com
All rights reserved.
Document Part Number: 700-0031-01
TR4-20 Full-Featured Mobile DVR System
Quick Installation Guide
If your TR4-20 Full-Featured Mobile DVR System is to be returned to Seon Design for service, please
call toll free 877-630-7366, or 604-524-6437 and ask for a Return Authorization (RA) number. An RA
number allows the Service Technicians to better track your product when it comes in for service. Please
show the RA number on the outside of the package. ANY PRODUCT SENT TO SEON DESIGN
WITHOUT AN RA NUMBER MAY BE REFUSED.
Please refer to the Warranty form provided with your product to review the terms of warranty service,
contact and shipping information, as well as other important issues regarding the service and operation
of your product.
Service and Warranty
