05
M
EN
U
S
ET
U
P
menu setup _
31
RECORD MODE
The details of the record menu are as follows:
Set the recording mode values to be applied when
pressing the
REC
button on the front panel.
Quality
Sets the recording video quality.
Set to any of Very High, High, Standard and Low.
Frame
Sets the number of frames for recording. The number
of frames refers to the number of screens recorded per
second.
Video Size
Set the screen size for recording.
Video
Source
Full D1
Half D1
CIF
NTSC
704 X 480
704 X 240
352 X 240
PAL
704 X 576
704 X 288
352 X 288
Auto Deletion
You can select any of
OFF
and
ON
by pressing “
OFF
.”
If “
ON
” is selected, the date for search is limited.
The date can be limited to 1 to 99 days. If “
OFF
” is
selected, the cursor cannot be moved to the date
selection area and the date for search is not limited.
If you press “Default”, it returns the initial values.
The Normal Recording frame rate should be set less or
equal to the event recording frame rate.
EVENT RECORD
The details of the event recording are as follows:
Event Record Setup
Set the recording mode values to be applied when an
event occurs.
Quality
Sets the recording video quality for any event.
Frame
Sets the number of frames for recording. The number
of frames indicates the number of screens recorded
per second.
Pre Event
Record the pre-conditions from the point that an event
has occurred.
3~5 Seconds
: Set the recording time prior to the
event occurrence.
Pre-Event Section
Time that an event has occurred
SHR-5042/5040 MENU
System
►
Camera
►
Monitoring
►
Record Mode
Event Record
►
Record Schedule
Backup
Network
►
Move/Control
Select
Exit
Event Record Setup
Alarm Detection Setup
Motion Detection Setup
Video Loss Detection Setup
Record Mode
Quality
Standard
OK
Cancel
Frame
Standard
Standard
Standard
CIF
Default
25
25
25
25
ON
99
Video Size
Auto Deletion
Event Record Setup
Quality
Standard
OK
Cancel
Frame
Standard
Standard
Standard
3 sec
Default
25
25
25
25
10 sec
CIF
Pre Event
Post Event
Video Size
SHR-5042_Eng.indb 31
2007-06-08 ｿﾀﾈﾄ 1:24:53
