05
M
EN
U
S
ET
U
P
menu setup _
29
Screen Setup
This is the screen that sets the Brightness/Contrast/Color
values for the camera image of each channel.
Place the cursor on the the desired channel for
adjustment and select it to set the Brightness/Contrast/
Color values.
The selected channel appears within the PIP zone on the
right.
The adjustment can be made from ‘0’ to ‘255’ using the
or
button.
If you press “
Apply All
”, the values for the last updated
channel are copied to entire channels.
If you press “
Default
”, the values for the current channel
are reset with ‘128’.
MONITORING
The details of the monitoring menu are as follows:
Live Mode
Event Monitoring Duration
It can be set to any of Off, 30 seconds, and
CONTINUE.
OFF
: The event monitoring that switches to the event
screen does not operate.
30 Seconds
: It sets the display duration of the current
channel until the next channel is displayed.
CONTINUE
: The event monitoring screen will be
maintained until it is cancelled by pressing the
ALARM
button on the front panel.
OSD
Date
: When it is On, the date will be displayed on the
screen. When it is Off, the date will not be displayed on
the screen.
Time
: When it is On, the time will be displayed on the
screen. When it is Off, the time will not be displayed on
the screen.
Title
: When it is On, the camera name will be displayed
on the screen. When it is Off, the camera name will not
be displayed on the screen.
State
: When it is On, the Audio/PTZ will be displayed
on the screen. When it is Off, the Audio/PTZ will not be
displayed on the screen.
Screen Setup
128
128
128
Default
Apply All
OK
Cancel
SHR-5042/5040 MENU
System
►
Camera
►
Monitoring
►
Record Mode
Event Record
►
Record Schedule
Backup
Network
►
Move/Control
Select
Exit
Live Mode
Spot Mode
Monitoring
Event Monitoring
OFF
Duration
ON
Date
ON
Time
ON
Title
ON
State
OFF
Support
OSD
1Ch DVR
OK
Cancel
SHR-5042_Eng.indb 29
2007-06-08 ｿﾀﾈﾄ 1:24:50
