Samsung SHR-5042 User Manual Download

Page: 30 / 78

_ menu setup

System Information & Setup



Mac Address

Displays the unique number of the network hardware

device attached to the system.



Software Version

Displays the current software version.



Package Search

After connecting the USB device (holding the DVR
software) to a USB port, press the (

) icon and the

DVR software will be automatically searched. If the

DVR software does not exist in the USB device, the

upgrade version will not be displayed.



Upgrade Version

The software version to be upgraded will be shown.
If you press the “

Upgrade

”, the restart message

window appears. You can select “

Yes

” to proceed

with the upgrade.



Remote Control ID

In order to control the DVR with a remote commander,

set the DVR and the remote control ID.

Caution



For the DVR to recognize the update file

the file should be inserted into a folder

named “update”. So this folder should

be created on a USB memory and then

the upgrade file copied inside the folder.



When upgrading the software, you must

neither turn off the power nor remove

the USB device. The system may run

abnormally.



When using a USB memory, please

use the USB device that can support

Linux 2.6.0 or higher. The system

cannot support the device that does not

support Linux.



The file system for the USB device must

be either FAT16 or FAT32. The system

does not support NTFS or other file

systems.



Since some USB devices either have no

power supply or have a low voltage, a

separate power supply may be needed

to recognize them.



When shipping this product, the remote
controller ID is set to ‘

’.



When changing the remote control ID, press
“

Remote Control ID

” and enter the DVR ID.

HDD Setup



HDD Info

Shows the installed HDD information and the capacity.

The first installed HDD is displayed as the Primary and

the second HDD is shown as the Secondary.

System Information/Setup

Cancel

Mac Address

Software Version

Package Search

Upgrade Version

Remote Control ID

00:C:8C:FF:00:A9

V1.000A10

Find package in USB

None

Move/Control

Select

Exit

Upgrade

HDD Setup

Cancel

Format

ATA

HDD END

Recording

Info

Format

PRIMARY

149GB

Overwrite

Off

Setup

SHR-5042_Eng.indb 26

2007-06-08 ｿﾀﾈﾄ 1:24:44

Summary of Contents for SHR-5042















































































Search results

Summary of Contents for SHR-5042

Reviews:

Related manuals for SHR-5042

Brands by name

Popular brands

Samsung SHR-5042, User Manual

Search results

Summary of Contents for SHR-5042

Reviews:

Related manuals for SHR-5042

Brands by name

Popular brands