Samsung SHR-3091, User Manual

Page: 68 / 98

User’s Manual
58
Password Setup Screen
An Administrator password is required to turn the system off, enter the setup screen, load
default setups, clear all data, change system date and time and change the Administrator
password. A User password is required to enter playback, fast forward playback and fast
backward playback modes from live monitoring mode, enter the search menu screen in live
monitoring mode and setup screens (access to only the Clip Copy setup screens). When
pressing the
ALARM.NEAR
button to display the event log in live monitoring mode unless there
is an active alarm. Highlight
Password
in the Main menu and press to enter the
Password
screen.
Figure 65 — Password setup screen.
Highlight the box beside User and press the button to toggle between On and Off . If the
password is set to
On
, you will be asked to enter the current password so that you can turn it Off.
If the password is set to
Off
, you will be asked to enter the new password and to confirm it
before it will be turned on.
The Administrator password cannot be turned On and Off. You can change the Administrator
password by first entering the current password, entering a new password and finally
confirming the new password.
To change the password, highlight the Password box and press the button. A window
appears asking you to enter the current password. If you enter the correct password, another
window appears asking you to enter a new password using the camera buttons. After you press
the
button, another screen appears asking you to confirm the new password.
NOTE: The Admin and User passwords are composed of up to eight digits using the
camera buttons. The default User password is
1234 , and Admin password is 4321 .