Samsung SHR-3091, User Manual

Page: 26 / 98

User’s Manual
16
The
Quick Setup
screen allows you to set up the most commonly used features of your DVR.
Use the arrow buttons to move through the options. Pressing the button lets you make your
selections.
NOTE: If you enter the Quick Setup screen by entering User password, only Password
setup will be permitted.
Highlight the box beside
Quick Setup
and press the button to toggle between
On
and
Off
.
If you select Off , you will use the Normal Setup screen to change the DVR’s settings.
Highlight the
Recording Speed
box and select recording speeds from as few as one image
every 10 seconds to as fast as 60 ips.
NOTE: The DVR has a maximum recording speed of 60 ips per camera, however, the
recording speed may not be achieved when averaged over all cameras.
Highlight the
Recording Quality
box and select from
Very High
,
High
,
Standard
and
Low
.
Highlight the box beside
Audio Recording
and select either
On
or
Off
.
NOTE: It is the user’s responsibility to determine if local laws and regulations permit
recording audio.
Highlight the box beside Sequence Dwell Time and select from 3 to 60 seconds for the camera
sequence dwell time.
Selecting System Information… enters that screen.
Selecting
Storage…
enters a screen where you can check the storage status.
Selecting Camera… enters a screen where you can set up camera information.
Selecting
Network Setup…
enters a screen where you can set up network information.
Selecting
Password…
enters a screen where you will be able to change passwords.
Selecting Date/Time… enters a screen where you will be able to set the DVR’s time and date.
Selecting
System Shutdown…
shuts the DVR down. When shutting down the DVR, you
need to confirm that you want to shut down the unit, you will be asked for an administrator
password.
NOTE: The Quick Setup mode will be released automatically when the user changes the
DVR settings remotely using the Smart View program.