Samsung SHR-3091, User Manual

Page: 35 / 98

Digital Video Recorder
25
Storage Screen
Highlight
Storage
in the Main menu and press the
button. The
Storage
setup screen
appears. The DVR displays the storage status when the installed IDE hard disk drives support
the S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) monitoring program.
Figure 30 — Storage screen.
NOTE: When the DVR has more than four storage devices, you can scroll through the
list by selecting the
Up and Down arrow buttons under the list.
The
Type
field displays the type and capacity of storage devices.
The Status field displays “Good” , “Bad” , “S.M.A.R.T. Inop.” , “S.M.A.R.T. Alert” , “High
Temperature”
or
“Not installed
, depending on storage conditions.
• Good — The storage condition is normal.
•
Bad
— Data cannot be written on or read from the storage device.
•
S.M.A.R.T. Inop.
— Storage conditions are normal, however, the S.M.A.R.T. monitoring
is not working or supported
•
S.M.A.R.T. Alert
— S.M.A.R.T. monitoring has detected a fault condition.
•
High Temperature
— S.M.A.R.T. monitoring has detected that the temperature of storage
device exceeded the preset temperature threshold
• Not installed — The storage device is not installed.
NOTE: Once the “S.M.A.R.T. Alert” message displays, replacing the hard disk drive is
recommended, usually within 24 hours.