Samsung SDS-V4040 User Manual Download Page 83

Page: 83 / 130

Web VieWer

uSing liVe VieWer (WindoWS)

The Live Viewer screen consists of following :

This displays the IP address and the model name of the connected DVR.

These menus consist of <

liVe

>, <

SetuP

>, <

About

These buttons are used for the screen split and full screen mode.

Shows the IP address and model name of the connected DVR.

Select to turn the sound on/off.

Select the format of OSD information that will be displayed on Live Viewer.

Select <

dVr time

> or <

Pc time

> for the OSD time information display setting of the Live Viewer.

These buttons are used for sequence and changing the screen channel.

These buttons are used for capture, print, and save the image.

Shows the channel of the connected DVR.

This displays the screen for connected camera with DVR.

The initial split-screen mode is set according to the number of channels connected to DVR.

You can change the split-screen mode by clicking buttons for split-screen modes.

English

_83

c
d
e
f

g
h

Summary of Contents for SDS-V4040



































































































































Search results

Summary of Contents for SDS-V4040

Reviews:

Related manuals for SDS-V4040

Brands by name

Popular brands

Samsung SDS-V4040, User Manual

Search results

Summary of Contents for SDS-V4040

Reviews:

Related manuals for SDS-V4040

Brands by name

Popular brands