Samsung SDS-V4040 User Manual Download Page 49

Page: 49 / 130

English

_49

main menu

Formatting

You can format a storage device.

Using the mouse may help make setup easier.

Use the up/down buttons (

) in <

Device

> window to

move to <

Storage Device

>, and press [

enTeR

] button.

Select <

Format

A window for selection of device for formatting appears.

Use direction buttons (

$%_ +

) to select a device to be

formatted.

Select <

Format

> on the bottom of the screen.

Press <

> on the “

manage

” confirmation window will

start formatting the selected device.

When the formatting is done, press <

Even when formatted, used HDD space will not be 0 GB due

to the space reserved by the system required for operating.

Storage Device

Device

Cancel

HDD Alarm

Format

Device

Select

Used/Total

Usage

HDD

1.82G/494.75G Internal

Format

Storage Device

Device

Cancel

HDD Alarm

Format

Device

Select

Used/Total

Usage

HDD

1.82G/494.75G Internal

Format

Manage

Formatting deletes all recordings.

Proceed formatting?

Cancel

Summary of Contents for SDS-V4040



































































































































Search results

Summary of Contents for SDS-V4040

Reviews:

Related manuals for SDS-V4040

Brands by name

Popular brands

Samsung SDS-V4040, User Manual

Search results

Summary of Contents for SDS-V4040

Reviews:

Related manuals for SDS-V4040

Brands by name

Popular brands