Samsung SDS-V4040, User Manual

Page: 47 / 130

English _47
!
main menu
•
Screen Setup : The video appeared on the screen may vary
depending on the channel’s camera, configure the DVR
display to your preferences.
Select a channel and adjust the < (Brightness) >,
< (Contrast) >, and < (Color) > of the selected channel.
` Press the < init > to initialize settings back to the default 50.
•
Privacy Region : You can specify a certain area of the
camera video to be protected for your privacy.
6. When the camera setup is done, press < OK >.
To set the privacy region
Select < Privacy Region >.
When “ Privacy Region ” window appears, select a
channel for detection and set the area of motion
detection.
•
To set the area in “ Privacy Region ” window
In the “ Privacy Region ” window, select desired region
from < >.
•
Privacy Region
You can specify up to 4 privacy zones for each channel,
which can be identified by the color.
1 Purple 2 Green 3 Blue 4 Yellow
•
To set the area using < individual > selection
Privacy Region
OK Cancel
Apply to All CH
CH1
Privacy Region1
Individual
When selected < individual >, “ Privacy Region ” window disappears and you can select cells one by one.
When the motion area setup is done, Right-click to select < menu > in the context menu or the [ menu ]
button on the remote control to display the “ Privacy Region ” window again.
- Clear All : Selected cell is removed from the Privacy Region.
- Menu : After selecting individual motion areas, move to the “
Privacy Region ”
window.
` If selected < Apply to All CH >, selected motion area is applied to all channels.
When completing the privacy zone settings, click < OK >.
Clear All
Menu
Screen Setup
Init Apply to All CH
CH1 50 50 50
OK Cancel