background image

5. conveying Modified Source Versions.

You may convey a work based on the Program, or the modifications to 

produce it from the Program, in the form of source code under the 

terms of section 4, provided that you also meet all of these conditions:

a)   The work must carry prominent notices stating that you modified 

it, and giving a relevant date. 

b)   The work must carry prominent notices stating that it is released 

under this License and any conditions added under section 7. This 

requirement modifies the requirement in section 4 to “keep intact all 

notices”. 

c)   You must license the entire work, as a whole, under this License 

to anyone who comes into possession of a copy. This License will 

therefore apply, along with any applicable section 7 additional 

terms, to the whole of the work, and all its parts, regardless of 

how they are packaged. This License gives no permission to 

license the work in any other way, but it does not invalidate such 

permission if you have separately received it. 

d)    If the work has interactive user interfaces, each must display 

Appropriate Legal Notices; however, if the Program has interactive 

interfaces that do not display Appropriate Legal Notices, your 

work need not make them do so. 

A compilation of a covered work with other separate and independent 

works, which are not by their nature extensions of the covered work, 

and which are not combined with it such as to form a larger program, in 

or on a volume of a storage or distribution medium, is called an 

“aggregate” if the compilation and its resulting copyright are not used to 

limit the access or legal rights of the compilation’s users beyond what 

the individual works permit. Inclusion of a covered work in an aggregate 

does not cause this License to apply to the other parts of the 

aggregate.

6. conveying non-Source Forms.

You may convey a covered work in object code form under the terms of 

sections 4 and 5, provided that you also convey the machine-readable 

Corresponding Source under the terms of this License, in one of these 

ways:

a)   Convey the object code in, or embodied in, a physical product 

(including a physical distribution medium), accompanied by the 

Corresponding Source fixed on a durable physical medium 

customarily used for software interchange. 

b)   Convey the object code in, or embodied in, a physical product 

(including a physical distribution medium), accompanied by a 

written offer, valid for at least three years and valid for as long as 

you offer spare parts or customer support for that product model, 

to give anyone who possesses the object code either (1) a copy of 

the Corresponding Source for all the software in the product that 

is covered by this License, on a durable physical medium 

customarily used for software interchange, for a price no more 

than your reasonable cost of physically performing this conveying 

of source, or (2) access to copy the Corresponding Source from a 

network server at no charge. 

c)   Convey individual copies of the object code with a copy of the 

written offer to provide the Corresponding Source. This alternative 

is allowed only occasionally and noncommercially, and only if you 

received the object code with such an offer, in accord with 

subsection 6b. 

d)   Convey the object code by offering access from a designated 

place (gratis or for a charge), and offer equivalent access to the 

Corresponding Source in the same way through the same place at 

no further charge. You need not require recipients to copy the 

Corresponding Source along with the object code. If the place to 

copy the object code is a network server, the Corresponding 

Source may be on a different server (operated by you or a third 

party) that supports equivalent copying facilities, provided you 

maintain clear directions next to the object code saying where to 

find the Corresponding Source. Regardless of what server hosts 

the Corresponding Source, you remain obligated to ensure that it 

is available for as long as needed to satisfy these requirements. 

e)   Convey the object code using peer-to-peer transmission, provided 

you inform other peers where the object code and Corresponding 

Source of the work are being offered to the general public at no 

charge under subsection 6d. 

A separable portion of the object code, whose source code is excluded 

from the Corresponding Source as a System Library, need not be 

included in conveying the object code work.

A “User Product” is either (1) a “consumer product”, which means any 

tangible personal property which is normally used for personal, family, or 

household purposes, or (2) anything designed or sold for incorporation 

into a dwelling. In determining whether a product is a consumer 

product, doubtful cases shall be resolved in favor of coverage. For a 

particular product received by a particular user, “normally used” refers to 

a typical or common use of that class of product, regardless of the 

status of the particular user or of the way in which the particular user 

actually uses, or expects or is expected to use, the product. A product 

is a consumer product regardless of whether the product has 

substantial commercial, industrial or non-consumer uses, unless such 

uses represent the only significant mode of use of the product.

“Installation Information” for a User Product means any methods, 

procedures, authorization keys, or other information required to install 

and execute modified versions of a covered work in that User Product 

from a modified version of its Corresponding Source. The information 

must suffice to ensure that the continued functioning of the modified 

object code is in no case prevented or interfered with solely because 

modification has been made.

If you convey an object code work under this section in, or with, or 

specifically for use in, a User Product, and the conveying occurs as part 

of a transaction in which the right of possession and use of the User 

Product is transferred to the recipient in perpetuity or for a fixed term 

(regardless of how the transaction is characterized), the Corresponding 

Source conveyed under this section must be accompanied by the 

Installation Information. But this requirement does not apply if neither 

you nor any third party retains the ability to install modified object code 

on the User Product (for example, the work has been installed in ROM).

The requirement to provide Installation Information does not include a 

requirement to continue to provide support service, warranty, or 

updates for a work that has been modified or installed by the recipient, 

or for the User Product in which it has been modified or installed. 

Access to a network may be denied when the modification itself 

materially and adversely affects the operation of the network or violates 

the rules and protocols for communication across the network.

Corresponding Source conveyed, and Installation Information provided, 

in accord with this section must be in a format that is publicly 

documented (and with an implementation available to the public in 

source code form), and must require no special password or key for 

unpacking, reading or copying.

7. Additional terms.

“Additional permissions” are terms that supplement the terms of this 

License by making exceptions from one or more of its conditions. 

Additional permissions that are applicable to the entire Program shall be 

treated as though they were included in this License, to the extent that 

they are valid under applicable law. If additional permissions apply only 

to part of the Program, that part may be used separately under those 

permissions, but the entire Program remains governed by this License 

without regard to the additional permissions.

When you convey a copy of a covered work, you may at your option 

remove any additional permissions from that copy, or from any part of it. 

(Additional permissions may be written to require their own removal in 

certain cases when you modify the work.) You may place additional 

permissions on material, added by you to a covered work, for which 

you have or can give appropriate copyright permission.

Notwithstanding any other provision of this License, for material you add 

to a covered work, you may (if authorized by the copyright holders of 

that material) supplement the terms of this License with terms:

a)   Disclaiming warranty or limiting liability differently from the terms of 

sections 15 and 16 of this License; or 

b)   Requiring preservation of specified reasonable legal notices or 

author attributions in that material or in the Appropriate Legal 

Notices displayed by works containing it; or 

c)   Prohibiting misrepresentation of the origin of that material, or 

requiring that modified versions of such material be marked in 

reasonable ways as different from the original version; or 

d)   Limiting the use for publicity purposes of names of licensors or 

authors of the material; or 

e)   Declining to grant rights under trademark law for use of some 

trade names, trademarks, or service marks; or 

f)   Requiring indemnification of licensors and authors of that material 

by anyone who conveys the material (or modified versions of it) 

with contractual assumptions of liability to the recipient, for any 

liability that these contractual assumptions directly impose on 

those licensors and authors. 

All other non-permissive additional terms are considered “further 

restrictions” within the meaning of section 10. If the Program as you 

received it, or any part of it, contains a notice stating that it is governed 

by this License along with a term that is a further restriction, you may 

remove that term. If a license document contains a further restriction but 

permits relicensing or conveying under this License, you may add to a 

covered work material governed by the terms of that license document, 

provided that the further restriction does not survive such relicensing or 

conveying.

If you add terms to a covered work in accord with this section, you 

must place, in the relevant source files, a statement of the additional 

terms that apply to those files, or a notice indicating where to find the 

applicable terms.

Additional terms, permissive or non-permissive, may be stated in the 

form of a separately written license, or stated as exceptions; the above 

requirements apply either way.

Summary of Contents for SDS-V4040



































































































































Reviews: