Samsung SDS-V4040 User Manual Download Page 120

Page: 120 / 130

normally distributed (in either source or binary form) with the major

components (compiler, kernel, and so on) of the operating system on

which the executable runs, unless that component itself accompanies

the executable.

If distribution of executable or object code is made by offering access to

copy from a designated place, then offering equivalent access to copy

the source code from the same place counts as distribution of the

source code, even though third parties are not compelled to copy the

source along with the object code.

You may not copy, modify, sublicense, or distribute the Program

except as expressly provided under this License. Any attempt otherwise

to copy, modify, sublicense or distribute the Program is void, and will

automatically terminate your rights under this License. However, parties

who have received copies, or rights, from you under this License will not

have their licenses terminated so long as such parties remain in full

compliance.

You are not required to accept this License, since you have not

signed it. However, nothing else grants you permission to modify or

distribute the Program or its derivative works. These actions are

prohibited by law if you do not accept this License. Therefore, by

modifying or distributing the Program (or any work based on the

Program), you indicate your acceptance of this License to do so, and all

its terms and conditions for copying, distributing or modifying the

Program or works based on it.

Each time you redistribute the Program (or any work based on the

Program), the recipient automatically receives a license from the original

licensor to copy, distribute or modify the Program subject to these

terms and conditions. You may not impose any further restrictions on

the recipients’ exercise of the rights granted herein. You are not

responsible for enforcing compliance by third parties to this License.

If, as a consequence of a court judgment or allegation of patent

infringement or for any other reason (not limited to patent issues),

conditions are imposed on you (whether by court order, agreement or

otherwise) that contradict the conditions of this License, they do not

excuse you from the conditions of this License. If you cannot distribute

so as to satisfy simultaneously your obligations under this License and

any other pertinent obligations, then as a consequence you may not

distribute the Program at all. For example, if a patent license would not

permit royalty-free redistribution of the Program by all those who receive

copies directly or indirectly through you, then the only way you could

satisfy both it and this License would be to refrain entirely from

distribution of the Program.

If any portion of this section is held invalid or unenforceable under any

particular circumstance, the balance of the section is intended to apply

and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents

or other property right claims or to contest validity of any such claims;

this section has the sole purpose of protecting the integrity of the free

software distribution system, which is implemented by public license

practices. Many people have made generous contributions to the wide

range of software distributed through that system in reliance on

consistent application of that system; it is up to the author/donor to

decide if he or she is willing to distribute software through any other

system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be

a consequence of the rest of this License.

If the distribution and/or use of the Program is restricted in certain

countries either by patents or by copyrighted interfaces, the original

an explicit geographical distribution limitation excluding those countries,

so that distribution is permitted only in or among countries not thus

excluded. In such case, this License incorporates the limitation as if

written in the body of this License.

The Free Software Foundation may publish revised and/or new

versions of the General Public License from time to time. Such new

versions will be similar in spirit to the present version, but may differ in

detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program

specifies a version number of this License which applies to it and “any

later version”, you have the option of following the terms and conditions

either of that version or of any later version published by the Free

Software Foundation. If the Program does not specify a version number

of this License, you may choose any version ever published by the Free

Software Foundation.

10.

If you wish to incorporate parts of the Program into other free

programs whose distribution conditions are different, write to the author

to ask for permission. For software which is copyrighted by the Free

Software Foundation, write to the Free Software Foundation; we

sometimes make exceptions for this. Our decision will be guided by the

two goals of preserving the free status of all derivatives of our free

software and of promoting the sharing and reuse of software generally.

no WArrAntY

11.

BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT

PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE

STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER

PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY

OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF

THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE

DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY

SERVICING, REPAIR OR CORRECTION.

12.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY

OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE

PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR

INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED

TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR

LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF

THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN

IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

how to Apply these terms to Your new Programs

If you develop a new program, and you want it to be of the greatest

possible use to the public, the best way to achieve this is to make it free

software which everyone can redistribute and change under these

terms.

To do so, attach the following notices to the program. It is safest to

attach them to the start of each source file to most effectively convey

the exclusion of warranty; and each file should have at least the

“copyright” line and a pointer to where the full notice is found.

one line to give the program’s name and an idea of what it does.

This program is free software; you can redistribute it and/or modify it

under the terms of the GNU General Public License as published by the

Free Software Foundation; either version 2 of the License, or (at your

option) any later version.

This program is distributed in the hope that it will be useful, but

WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See

the GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program; if not, write to the Free Software Foundation,

Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Also add information on how to contact you by electronic and paper

mail. If the program is interactive, make it output a short notice like this

when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author

Gnomovision comes with ABSOLUTELY NO WARRANTY; for details

type ‘show w’. This is free software, and you are welcome to

redistribute it under certain conditions; type ‘show c’ for details.

The hypothetical commands ‘show w’ and ‘show c’ should show the

appropriate parts of the General Public License. Of course, the

commands you use may be called something other than ‘show w’ and

‘show c’; they could even be mouse-clicks or menu items--whatever

suits your program.

You should also get your employer (if you work as a programmer) or

your school, if any, to sign a “copyright disclaimer” for the program, if

necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program

‘Gnomovision’ (which makes passes at compilers) written by James

Hacker.

signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This

General Public License does not permit incorporating your program into

proprietary programs. If your program is a subroutine library, you may

consider it more useful to permit linking proprietary applications with the

library. If this is what you want to do, use the GNU Lesser General

Public License instead of this License.

gnu generAl Public licenSe

Version 3, 29 June 2007

Everyone is permitted to copy and distribute verbatim copies of this license

document, but changing it is not allowed.

Summary of Contents for SDS-V4040



































































































































Search results

Summary of Contents for SDS-V4040

Reviews:

Related manuals for SDS-V4040

Brands by name

Popular brands

Samsung SDS-V4040, User Manual

Search results

Summary of Contents for SDS-V4040

Reviews:

Related manuals for SDS-V4040

Brands by name

Popular brands