Samsung SDS-V4040, User Manual

Page: 71 / 130

English _71
!
main menu
mailing Service
You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.
M
` If an event occurs with a channel where the camera’s video is set to < OFF > or the remaining recording count is set
to < OFF >, only the text notification will be sent to the applicable email address.
`
The e-mail receivers are not able to adjust the attached image quality.
SmTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
1. In the < network > setting window, press the up/down
(
$%
) button to move to < mailing Service > and press the
[ enTeR ] button.
2. Select < SmTP >.
You will see the SMTP setting window.
3. Use direction buttons (
$%_ +
) to move to a desired item
and set the value.
•
ServerType : Displays the connected server type.
•
Server : Enter a server to connect to.
•
Port : Sets the communication port.
•
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
•
User : Enter a user to use authentication when connecting to the SMTP server.
•
Password : Enter the password of the SMTP server user.
•
Secure Transfer : Select one from < never > and < TLS (if available) >.
•
Sender : Use the virtual keyboard to enter the sender’s e-mail address.
` Refer to “ Using Virtual Keyboard ”. (Page 37)
•
TEST : Conducts the test on the server settings.
4. When the SMTP setting is done, press < OK >.
Mailing Service
SMTP
Event
OK Cancel
Use Authentication
Group Recipient

ServerType SMTP mail Server

Server
 Port 25
User
Password
 Secure Transfer Never

Sender ex. user@example.net
TEST