Samsung SCX-5835FN Service Manual Download Page 82

Page: 82 / 229

Alignment & Troubleshooting

Service Manual

4-31

Samsung Electronics

4.1.7 Firmware Upgrade

• USB and Network port are used to F/W upgrade.

• Network applications (SWAS, SWS) can be used for network port upgrade.

4.1.7.1. Using the common method

①

Download the firmware file in the temporary folder. And unzip the file.

②

Delete all current jobs from Job Status window

③

Connect USB cable in the machine (idle state)

④

Send firmware file( *.hd ) by usblist2

- Drag the f/w file and Drop down on the usbprn2.exe. And then f/w update will be started automatically.

⑤

Please wait until end reboot.

Drag and Drop

SCX-5835FN

Summary of Contents for SCX-5835FN






































































































































































































































Search results

Summary of Contents for SCX-5835FN

Reviews:

Related manuals for SCX-5835FN

Brands by name

Popular brands

Samsung SCX-5835FN, Service Manual

Search results

Summary of Contents for SCX-5835FN

Reviews:

Related manuals for SCX-5835FN

Brands by name

Popular brands