Samsung SCX-5315F, User Manual

Page: 82 / 98

T
ROUBLESHOOTING
6.5
6
In the Manual Feeder
“ ” appears on the display when you try to print using the
manual feeder and the machine does not detect paper, due to no paper or
improper paper loading.
The error message may also occur when the paper is not properly fed into
the machine through the manual feeder. In that case, pull the paper out of
the machine.
Tips for Avoiding Paper Jams
By selecting the correct paper types, most paper jams can be avoided.
When a paper jam occurs, follow the steps outlined in page 6.3.
• Follow the procedures on page 1.9 when you load paper. Ensure that the
adjustable guides are positioned correctly.
• Do not overload the paper tray. Ensure that the paper is below the paper
capacity mark on the inside wall of the paper tray.
• Do not remove the paper from the tray while your machine is printing.
• Flex, fan and straighten the paper before loading.
• Do not use creased, damp or highly curled paper.
• Do not mix paper types in the paper tray.
• Use only recommended print materials. See “Paper Specifications” on
page A.5.
• Ensure that the print side of print materials is facing down in the paper
tray and facing up in the manual feeder.
Clearing LCD Error Messages
Messages appears on the display to indicate the control panel to indicate
the machine’s status or errors. Refer to the following table to understand
the message’s meaning and correct the problem, if necessary. Messages
and their meanings are listed in alphabetical order.
Display Meaning Suggested solutions
Cancel ?
1:Yes 2:No
Your machine’s memory is full
during the machine stores the
document into the memory. To cancel the fax job, press the 1
button to accept “Yes”
If you want to send the pages were
stored, press the
2 button to accept
“No.” You should send the remaining
pages later when the memory is
available.