Samsung SCX-5315F User Manual Download Page 38

Page: 38 / 98

ASIC

UNCTIONS

2.3

Adjust the document guides to the document size.

Adjust the document resolution,. See the following section.

Adjusting the Document Resolution

The default document settings produce good results when setting typical
text based documents.

However, if you send documents that are of a poor quality, or contain
photographs, you can adjust the resolution to produce a higher quality fax.

Press

Resolution

By pressing

Resolution

or the scroll button (

), you can choose

from Standard, Fine, Super Fine and Photo.

The document types recommended for the resolution settings are described
in the following table below:

OTES

• For the memory transmission, Super Fine mode is not available. The

resolution setting is automatically changed to Fine.

• When your machine is set to Super Fine resolution and the remote fax

machine does not support the Super Fine resolution, the machine transmits

using the highest resolution mode supported by the remote fax machine.

Mode

Recommended for:

Standard

Documents with normal-sized characters.

Fine

Documents containing small characters or thin lines or
documents printed using a dot-matrix printer.

Super Fine

Documents containing extremely fine detail. Super
Fine mode is enabled only if the remote machine also
supports the Super Fine resolution. See the notes
below.

Photo

Documents containing shades of gray or photographs.

Summary of Contents for SCX-5315F



































































































Search results

Summary of Contents for SCX-5315F

Reviews:

Related manuals for SCX-5315F

Brands by name

Popular brands

Samsung SCX-5315F, User Manual

Search results

Summary of Contents for SCX-5315F

Reviews:

Related manuals for SCX-5315F

Brands by name

Popular brands