My Stuff 86
following message displays “Sorry, no match found,” and voice
recognition turns off.
You must end your current Voice Commands call before you can
make another call using Voice Commands. You can only originate
the first call in a 3-way call using Voice Commands.
Voice Recognition Tips
•
Wait for the tone before you speak.
•
Speak clearly and at a normal volume.
•
There is no need to use paused speech. The voice recognition software
has been trained to recognize natural speech, and performs best when
you speak naturally.
•
In very noise environments, it may be helpful to use a headset or a
Bluetooth headset.
Contacts List Voice Activation
On startup, Nuance Voice Recognition software reads your
Contacts list and voice-activates all the names.
When you add or change contacts, the software automatically
reloads and voice-activates the list when you add or modify a
contact.
Record Audio
Record Audio allows you to record voice memos. It also allows
you to send your audio clip to other people as an attachment of
an MMS message. Recording time is limited to free memory
space available.
1.
In Idle mode, press
Menu
➔
My Stuff
➔
Tools
, and press
the
Select
soft key or the
key.
2.
Highlight
Record Audio
and press the
Select
soft key or
the
key.
3.
Options before the audio recording is made are:
• Record
: allows you to start recording an audio clip.
• My Voice Clips
: allows you to view your audio clips.
• Record Audio Settings
: allows you to set up a recording preset:
Default Name and Recording Time (1 minute, 2 minutes,
3 minutes, 4 minutes, 5 minutes, 60 minutes, or Limit for MMS).
4.
Press the
key to begin recording. Speak clearly into
the microphone.
5.
Press the
Stop
soft key to stop the recording or pause the
recording by pressing the
key. Once the audio
recording stops, the message automatically saves.
6.
Press the
Options
soft key to display the following options:
A847.book Page 86 Thursday, April 29, 2010 5:26 PM
