Samsung OfficeServ DS-5012L User Manual Download Page 156

Page: 156 / 187

Navigation Menus

DS/ITP-5012L Phone User Guide

143

Searching a List of D-Days

Press the

[Menu]

button and use the direction buttons to select

[7. D-Day Plus]

[2. D-Day Search].

Then, press the

[Enter]

button.

When the list of registered D-Days

appears, press the direction buttons
to select the desired D-Day item.

Select the desired D-Day from

  the D-Day Search screen and
  press the [Enter] button to
   check the details.

Press the

[Menu]

button to edit or delete

the settings for the selected D-Day.

Unit Conversion

This feature provides a simple conversion program for commonly used units
of measurement for temperature, length, weight, volume, and area.

Press the

[Menu]

button and use the direction buttons to select

[8. Unit Convert]

Then, press the

[Enter]

button.

Use the direction buttons to select the category (Length, Weight, Area,

Volume, Temp). Then, press the

[Enter]

button.

Summary of Contents for OfficeServ DS-5012L




























































































































































































Search results

Summary of Contents for OfficeServ DS-5012L

Reviews:

Related manuals for OfficeServ DS-5012L

Brands by name

Popular brands

Samsung OfficeServ DS-5012L, User Manual

Search results

Summary of Contents for OfficeServ DS-5012L

Reviews:

Related manuals for OfficeServ DS-5012L

Brands by name

Popular brands