Samsung OfficeServ DS-5012L User Manual Download Page 139

Page: 139 / 187

Navigation Menus

DS/ITP-5012L Phone User Guide

126

Search by Name

You can search for a telephone number based on the names registered with
the phone.

Press the

[Menu]

button and use the direction buttons to select

[1. Search]

[2. By Name]

Then, press the

[Enter]

button.

You are prompted to enter a name.

Enter the name or part of a name to
search for and press the

[Enter]

button.

(Refer to

Entering Characters

Things You

Should Know

for how to enter characters.)

The speed dial name(s) matching the entry will be displayed.

If you press the [Enter] button without entering a speed dial number,

a list of all the telephone numbers will be displayed.

Press the

[Enter]

button to view the saved details for the selected num-

ber.

To change or delete the speed dial name, press the [Menu] button. When the

popup menu appears, select the desired menu (Edit / Delete / New Entry).

Move to the desired telephone number and press the

[Send]

button to

dial the number.

Summary of Contents for OfficeServ DS-5012L




























































































































































































Search results

Summary of Contents for OfficeServ DS-5012L

Reviews:

Related manuals for OfficeServ DS-5012L

Brands by name

Popular brands

Samsung OfficeServ DS-5012L, User Manual

Search results

Summary of Contents for OfficeServ DS-5012L

Reviews:

Related manuals for OfficeServ DS-5012L

Brands by name

Popular brands